Trusted for over 40 years by the US Military, Single Lid Cases offer 20% more protective material in the edges and corners, where it is needed most, ensuring that valuable equipment is kept safe from any unforeseen elements. Available in several sizes, these cases are completely customizable with a wide range of bolt-on options like document holders, casters, humidity indicators and much more.
- One-piece construction, molded from lightweight, high-impact polyethylene
- Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
- Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
- Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
- Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
- Reinforced corners and edges for additional impact protection
- Recessed hardware for extra protection
DIMENSIONS
Interior (L×W×D)
39.87 x 24.31 x 18.00 in (101.3 x 61.7 x 45.7 cm)
Exterior (L×W×D)
42.87 x 27.31 x 20.19 in (108.9 x 69.4 x 51.3 cm)
MEASUREMENTS
Lid Depth
5.25" (13.3 cm)
Bottom Depth
12.75" (32.4 cm)
Total Depth
18" (45.7 cm)
Int Volume
10.1 ft³ (0.286 m³)
WEIGHTS
Weight
50.20 lbs (22.8 kg)
Buoyancy
803.84 lbs (364.6 kg)
MATERIALS
Body Material
RotoMolded Polyethylene
。箱體材質:滾塑聚乙烯
。內部尺寸:長.101 x 寬.62 x 深.46 公分
。外部尺寸:長.109 x 寬.69 x 深.51 公分
。箱蓋深度:13 公分
。箱體深度:33 公分
。箱重:23 公斤
。耐熱溫度:-29° C ~ 60° C
TESTING
Pelican-Hardigg Single Lid style roto cases have been designed and tested to meet or exceed the applicable requirements of the following standards. Qualification is conducted through direct testing and/or engineering analysis of product and test similarity; testing has been conducted on containers of various sizes and configurations as applicable.
- MIL-STD-810E, Method 505.3, Procedure II – SOLAR RADIATION
- ASTM E96, MIL-C-4150J and ASTM D 1008-64 – WATER-VAPOR TRANSMISSION RATE (PERMIABILITY)
- FED SPECIFICATION L-P-390c, Type M. – TENSILE/ELONGATION/COMPRESSIVE/FLEXURAL
- FED-STD-101, Method 5009 – LEAK TEST
- FED-STD-101, Method 5016 & DOT 49CFR 178.350 – CONCENTRATED LOAD (STACK/SUPERIMPOSED)
- FED-STD-101, Method 5011 – HANDLING
- MIL-STD-810E, Method 514.4 – VIBRATION (COMPOSITE INPUTS)
- MIL-STD-810E, Method 516.4, procedure IV – SHOCK (TRANSIT DROP)
- MIL-STD-810E, Method 501.3, procedure I – TEMPERATURE (STORAGE, HIGH TEMPERATURE)
- MIL-STD-810E, Method 502.3, procedure I – TEMPERATURE (STORAGE, LOW TEMPERATURE)
- MIL-STD-810E, Method 507.3, Procedure I – RELATIVE HUMIDITY
- MIL-STD-810E, Method 500.3 – ALTITUDE (LOW PRESSURE)
- MIL-STD-210C & MIL-STD-810D, Method 510.2, Procedure I – SAND AND DUST
- MIL-STD-810E, Method 509.3, Procedure I @ 5% – SALT FOG
- MIL-STD-810D, Method 508.4 – FUNGUS
- MIL-STD-810D, Method 506.2, Procedure I – RAIN WITH WIND
- MIL-STD-810D, Method 512.2, Procedure I – IMMERSION ONE (1) METER
- ATA 300, Category I – REQUIRMENTS FOR REUSABLE CONTAINERS
軍用防震箱,派力肯,美國Pelican,專業防震氣密箱,防震箱,專業器材防護箱
,行李箱,消防保護箱,槍箱,皮卡車用箱,保冷箱,展覽用箱,潛水用箱,樂器箱
,無人飛機用箱,儀器箱,防腐漆,防銹漆,金屬防鏽底漆,鐵架防鏽漆,戶外防鏽漆
,金屬防鏽漆,防鏽漆種類,電動車滅火系統,特殊救災裝備,電動車滅火設備,鋰電池滅火系統,電動車滅火器,電動車救災裝備,電動車火災,鋰電池火災,葡萄酒櫃,酒窖客製,酒櫃設計,DIVIN 葡萄酒櫃,DIVIN 酒窖客製,DIVIN 酒櫃設計,義大利麝香葡萄酒