Pelican AL1010-0905 Single Lid Case

網路價 $0
對於商品有需求請致電客服02-23015808 或來信告知 酒類或相關軍警/消防用設備 請填寫聯絡表單 我們將盡速為您服務

AL1010-0905 Single Lid Case

 

  • Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
  • Reinforced corners and edges for additional impact protection
  • Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
  • Recessed hardware for extra protection
  • Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
  • Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
Trusted for over 40 years by the US Military, Single Lid Cases offer 20% more protective material in the edges and corners, where it is needed most, ensuring that valuable equipment is kept safe from any unforeseen elements. Available in several sizes, these cases are completely customizable with a wide range of bolt-on options like document holders, casters, humidity indicators and much more.
  • Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
  • Reinforced corners and edges for additional impact protection
  • Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
  • Recessed hardware for extra protection
  • Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
  • Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
  • One-piece construction, molded from lightweight, high-impact polyethylene
 

INTERIOR (L X W X D)
9.93" x 10.00" x 13.95" (25.2 x 25.4 x 35.4 cm)

EXTERIOR (L X W X D)
12.93" x 13.00" x 15.64" (32.8 x 33 x 39.7 cm)

LID DEPTH:  5.25" (13.3 cm)

BOTTOM DEPTH:  8.70" (22.1 cm)

TOTAL DEPTH:  13.95" (35.4 cm)

INT VOLUME:  0.8 ft³ (0.023 m³)

WEIGHT:  10.00 lbs (4.5 kg)

BUOYANCY:  84.98 lbs (38.5 kg)

BODY: RotoMolded Polyethylene

LATCH: Steel (Nickel-black Plated)

O-RING: Silicone Sponge

PINS: Stainless Steel

PINS (ALT): Aluminum

PURGE BODY: Aluminum

MINIMUM TEMPERATURE:  -20° F (-29 ° C)

MAXIMUM TEMPERATURE:  140° F (60 ° C)